Stylish Design Automatic Hydraulic Press Machine With 135 Ton
The ACCURL press brake, engineered with great care for details, is
a high quality machine tool. The studies made on the framework
flections have allowed us to design a product that reacts in the
most appropriate and responsive way to the mechanical
solicitations, therefore guaranteeing a stable structure, thus a
higher precision in bending. This feature is even enhanced by a
system of automatic crowning. Worth mentioning is also the
possibility to add options and upgrades on the configuration, at
1. The frame of machine is composed of tank, worktable, left and
right housings and RAM. So it has high strength and good rigidity.
Also it takes vibration to eliminate Stress.
2. Synchronization working principal of both machines: Adopting
electric-hydraulic Proportional valve to ensure the synchronization
of both machines. The proportional valve is made by BOSCH company
with very good performance such as small friction between mechanic
action pairs, fine electronic amplifier and electric magnet with
high controlling force and continuous action.
There are two raster displayers on both sides of machine to inspect
the position of RAM continuously and feed back the signal to
control system, then the control system will control
electric-hydraulic valve to make two cylinders synchronization on
one machine. Because the raster displayers are installed to "C"
plates, not on housing plates directly, the deflection of RAM and
frame when working will not effect its measuring and controlling
When two machines working together, the differential potentiometer
installed between two machines will transfer the mechanic
synchronizing signal into electronic one and feed back to
synchronization plate and control system. The signal will be
enlarged by BOSCH amplifier to control the synchronization of both
machines by controlling electric-hydraulic proportional valve. So
the synchronization of two machines is achieved with high
3. Through computer, the operator could communicate with machine.
The computer has several service language, calculate and adjust the
bending force automatically. Also it could calculate and control
the dead point, speed changing point. The strokes (Y1, Y2) of RAM
could make a small tilt to meet the special requirement of user.
4. Equipped with good guiding system, position measuring system and
hydraulic balance system to meet the requirements of full length
job and eccentric job.
5. Worktable compensation unit is adopted to make up for deflection
of machine when working to make sure the precision of work piece.
6. The surface of cylinder has good wearing and heat treatment, so
it has good lubrication and long service life.
1. DELEM CYBELEC ModEva 15T CNC System
2. DELEM DA69 CNC System
3. Backgauge X-R or X-R-Z1/Z2
4. DSP Optical Safety Guard
5. 1000mm Backgauge Stroke
Specifications for CNC press Brake
|1||Type||Automatic Hydraulic Press Machine|
|2||CNC Control Axis||Y1-Y2-X-axis & Crowning|
|3||Bending force||135 Ton|
|4||Bending length||4200 mm|
|5||Distance between columns||3700 mm|
|7||Daylight Opening||400 mm|
|9||Table height||880 mm|
|10||Table Width||200 mm|
|11||Fast Speed||200 mm/sec|
|12||Bending Speed||0~10 mm/sec|
|13||Return Speed||160 mm/sec|
|14||Back Gauge Stroke||750 mm|
|14||Motor Power||11 KW|
|15||Overall dimensions||4500×1650×2540 mm|
|16||Machine weight||10000 kg|
|17||Option 1||DELEM DA52S CNC SYSTEM|
|Option 2||DELEM DA66T CNC SYSTEM|
|Option 3||Additional axis: R (back gauge up and down)|